INTEGRATION GUIDE · JT808 / MDVR

How to connect JT808 / MDVR devices to cloudGPS

cloudGPS receives JT808 / MDVR trackers natively. Point the device to our server and it appears on the platform — no middleware, no extra hardware.

Connection parameters

Configure your device with the following server settings. Devices are identified and must be added to your cloudGPS account beforehand.

Server (domain)	jt.cloudgps.online
Port	3212
Transport	TCP
Data protocol	JT/T 808 (2011/2013/2019) + JT/T 1078
Identification	IMEI
APN	your SIM operator's APN

cloudGPS is hardware-agnostic — Teltonika, Bitrek, Wialon-compatible and Globus devices run on one platform, so mixed fleets stay together.

Video: live camera view opens right in the browser on the device's "Video" tab. No separate video-server settings on the device — the platform sends the media endpoint automatically (JT/T 1078).

Step-by-step setup

Get the device online in a few steps.

Add the device in cloudGPS

In your cloudGPS account add a new device of type JT808 / MDVR and enter its IMEI. Only authorized devices are accepted by the server.

Set the APN

Make sure the SIM card's mobile data APN is configured (and username/password if your operator requires them).

Point the device to the server

Set the server address, port and transport as below:

Server : jt.cloudgps.online
Port   : 3212 (TCP)

Via the manufacturer configurator or by SMS:

0000,A21,1,jt.cloudgps.online,3212

Verify

Once the device sends its first packet it goes online in cloudGPS within seconds — position, speed and sensor data appear on the map. If it stays offline, re-check APN, device authorization and that the port/TCP is reachable.

What your fleet gets on cloudGPS

cloudGPS turns raw telemetry into actionable fleet data.

videocamLive video (JT/T 1078) — camera streams in the browser, ADAS/DSM alarms with photo and video evidence.
speedReal-time tracking — live position, route history, stops, speed, I/O.
local_gas_stationFuel control (FuelAnalyzer) — level sensors, multi-tank, refuel/drain detection, water-in-tank.
timerEngine hours & counters — accurate billing and service intervals from CAN data.
my_locationGeofences & alerts — email and Telegram notifications.
verifiedPoland PUESC / e-TOLL — built-in SENT-GEO and e-TOLL (registered OUL/ZSL provider).
picture_as_pdfReports — PDF/Excel: fuel, tanks, counters, movement.
sync_altRetranslation — forward data to Wialon/Teltonika for zero-downtime migration.
languageMultilingual — interface and support in English, Estonian, Russian, Polish, Ukrainian.